GTX 1060
NVIDIA· GTX 10Quantus · Quantus (QUANTUS)
Overclock settings for the GTX 1060 on Quantus, last updated 2026-11-17.
- Eco · Balanced · Max: Core clock lock 1515 MHz, Memory lock 3982 MHz, Power limit 75 W. 42.6 MH/s measured on PeakMiner 2.20.9 in 1 test, 568.2 kH/W.
- Profiles
- 1
- Verified
- 0
- Test results
- 1
- Miners who tested
- 1
3 ways to run the GTX 1060
The best profile for each goalEco · Balanced · Max
Recommended by PeakMiner for this card.
42.6MH/s
on 2.20.9, 1 test · 75 W · 568.2 kH/W
from PeakMiner
1 confirmedOpen
All GTX 1060 profiles
Most trusted first · 1 published| Id | Mode | State | Core ± | Core lock | Mem ± | Mem lock | mV | W limit | W drawn | MH/s | kH/W | kH/W real | Version | By | Added |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| n/a | 1 confirmed | 1515 | 3982 | n/a | 75 | 74 | 42.6 | 568.2 | 575.8 | 2.20.9 | @peakminer | 2026-11-17 |
+150 is an offset from stock · 2265 is a locked clock · auto means the card decides · blank means the profile sets the other of the two
GTX 1060 questions
Answered from the results above- What are the best overclock settings for the GTX 1060 on Quantus?
- Eco and Balanced and Max: Core clock lock 1515 MHz, Memory lock 3982 MHz, Power limit 75 W. 42.6 MH/s measured on PeakMiner 2.20.9 in 1 test, 568.2 kH/W.
- What hashrate does the GTX 1060 get on Quantus?
- Miners have measured up to 42.6 MH/s on the GTX 1060, at a power limit of 75 W. That is the middle value of what other miners got with the same settings, not the author's own figure.
- What power limit should I set on the GTX 1060?
- The most efficient tested profile caps the card at 75 W and gives 568.2 kH/W.
- How do I apply these settings?
- PeakMiner applies the overclock for you. Add the --oc-profile flag to your mining command with a mode name, and each card in the rig gets the best profile for that mode. To keep one exact profile, pass its id instead.
- Have these settings been tested?
- Miners with this card have recorded 1 test result across 1 profile, from 1 miner. 0 profiles are verified, which means several other miners got the same result. Silicon varies between cards, so settings that run clean on one GPU may not on yours.
Run a GTX 1060? Try one of these and report the hashrate you get. It helps the next miner choose.Publish your settings →Compare all profiles →